|
|
|
- Direct ECB plug-in receiver card (factory installed)
- 16 transmitters maximun per receiver.
- Use part # RADIO-KIT004 when adding or replacing on-site.
- This is now standard equipment on all Circuit board operators
.......more details
|
|
|
|
|
|
- This modification provides a TEFC motor N4/12 watertight/oiltight control enclosure waterproof drive and limit chain and a watertight/oiltight three-button station.
|
| PRICE | $481.80 | $464.28 | $438.00 |
|
|
|
|
|
- A 6-digit non-resettable 24VAC electro-mechanical counter is mounted in the operator control enclosure.
- This devise counts the number of times the CLOSE coil is energized or whenever the operator reaches an auxiliary open limit switch.
- This corresponds to the number of complete door cycles of use.
|
|
|
|
|
|
- Provides additional contacts for and control of auxiliary devices such as external heaters security devices or warning devices
- 5V to 240VAC
|
|
|
|
|
|
- 3-button o/c/s function timer will start counting from fully open reverse and reset from any device
- 24V modifictation available on control circuit ( R) and ( M) and is included with the new full function smart board (E)
|
|
|
|
|
|
- For applications where dust water spray oil leaks or any other type of condensation is present.
- Includes TEFC motor seal-tight conduit and connectors NEMA 4/12 O/C/S push-button station NEMA 4/12 control box
|
|
|
|
|
|
- A safepack module is used as an "Intrinsically Safe Barrier Relay" and in hazardous locations with non-voltage producing sensors allowing the user to use a N.O. non-monitored sensing edge.
|
|
|
|
|
|
- Modification kit for in-field upgrades
|
|
|
|
|
|
- Installed directly on the output shaft of the operator.
- Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
- Includes sprocket for #50 chain
- Operator mounting side must be specified
.......more details
|
|
|
|
|
|
- For manual operation with a hand crank instead of a chain hoist.
- Hand crank hook and eye outlet is supplied.
- A 5/8" rod or pipe (SHAFT002) is required but not supplied
- SHAFT002 should be ordered separately and desired cut-to length specified at time of order.
.......more details
|
|
|
|
|
|
- For in-field upgrade on OGH and MGH operators
|
|
|
|
|
|
- Must specify exact length required when ordering
|
|
|
|
|
|
- Ideal for industrial environments submersible and impact resistant.
- Flexible design withstands and realigns after mechanical impact.
- Max. range 45ft.
- Incl. photoeyes 3ft of conductor wire and mounting hardware.
.......more details
|
|
|
|
|
|
|
- Upgrades added when purchasing a commercial operator
|
|
|
|
|
|
|
- Ideal for industrial environments submersible and impact resistant.
- Flexible design withstands and realigns after mechanical impact.
- Max. range 45ft.
- Incl. photoeyes 3ft of conductor wire and mounting hardware.
.......more details
|
|
|
|
|
|
|
- Allows for operation of a door by an auxiliary chain hoist.
- Hoist mechanism is coupled to front end of drawbar
- MUST specify door width and position of hoist (left or right)
|
|
|
|
|
|
|
- Compatible with models VSL595 BG770 and BG790
- Provides an adjustable timer in the operator control circuit which will close the gate automatically after the preset adjustable time interval
- May be factory or field instaled
- Same as 71-26438 G7126438 .......more details
|
|
|
|
|
|
|
- Modification available on certains models only
|
|
|
|
|
|
|
- Modification available for add-on to certain models only
|
|
|
|
|
|
|
- Can be added in the field
|
|
|
