Menu
 
User Name:
Password:
Remember Me:
Forgot your password...

  • Direct ECB plug-in receiver card (factory installed)
  • 16 transmitters maximun per receiver.
  • Use part # RADIO-KIT004 when adding or replacing on-site.
  • This is now standard equipment on all Circuit board operators .......more details
QTY 1+
PRICE$44.10

  • A 6-digit non-resettable 24VAC electro-mechanical counter is mounted in the operator control enclosure.
  • This devise counts the number of times the CLOSE coil is energized or whenever the operator reaches an auxiliary open limit switch.
  • This corresponds to the number of complete door cycles of use.
QTY 1+
PRICE$83.11

  • Provides additional contacts for and control of auxiliary devices such as external heaters security devices or warning devices
  • 5V to 240VAC
QTY 1+
PRICE$53.80

  • 3-button o/c/s function timer will start counting from fully open reverse and reset from any device
  • 24V modifictation available on control circuit ( R) and ( M) and is included with the new full function smart board (E)
QTY 1+
PRICE$103.00

  • A safepack module is used as an "Intrinsically Safe Barrier Relay" and in hazardous locations with non-voltage producing sensors allowing the user to use a N.O. non-monitored sensing edge.
QTY 1+
PRICE$441.00

  • Compatible with models VSL595 BG770 and BG790
  • Provides an adjustable timer in the operator control circuit which will close the gate automatically after the preset adjustable time interval
  • May be factory or field instaled
  • Same as 71-26438 G7126438 .......more details
QTY 1+
PRICE$120.49

  • Modification available for add-on to certain models only
QTY 1+
PRICE$425.00

  • Provides a limit switch for use by others to control auxiliary devices such as lights heaters dock levelers or other equipment.
  • The switch can be used to turn on or off such equipment when the door is fully opened or fully closed.
  • When ordering specify whether the auxiliary switch is required on the OPEN or CLOSE side of the control enclosure.
  • A maximum of 2 switches per operator can be supplied. .......more details
QTY 1+
PRICE$29.86

  • When a door is fully open if photocell or loop is activated then cleared the door closes immediately.
  • Available modification on R M only
QTY 1+
PRICE$37.50

  • An electromechanical counter is activated to count each complete door cycle.
QTY 1+
PRICE$84.89

  • An extra SPDT pole is available to control auxiliary features such as lights fans etc..
  • The additional pole must be specified on either the normally open and/or normally close contact as well as on the opening and/or closing sides
  • Modification upcharge is charged per side
QTY 1+
PRICE$19.84

  • Mounted to control panel cover in lieu of primary fuse block inside panel
QTY 1+
PRICE$258.88

  • Standard features include B2 C2 wiring 24V controls Hinged cover Backplate Primary fuses in panel
QTY 1+
PRICE$484.50

  • The standard 240V/1Ph op. is coverted to 208V/1Ph incoming power supply
Call for dealer price

  • Controlling action of two lights- sockets supplied on cover
QTY 1+
PRICE$180.50

  • Controlling action of two lights- sockets supplied on cover
QTY 1+
PRICE$204.25

  • Controlling action of two lights- sockets supplied on cover
QTY 1+
PRICE$204.25

  • Controlling action of two lights- sockets supplied on cover
QTY 1+
PRICE$204.25

QTY 1+
PRICE$74.97

  • Provides added strength to the belt drive system
QTY 1+
PRICE$55.00